All About The Electrical Panel Upgrade

All About The Electrical Panel Upgrade

All About The Electrical Panel Upgrade

Comments Off on All About The Electrical Panel Upgrade


All domestic electrical systems must be connected and grounded in accordance with electrical code standards. This involves two important tasks: the metal water and gas pipes must be connected equipotentially to create a continuous path of low resistance to the main electrical panel, and the main electrical panel must be grounded with a grounding electrode such as a rod or rods that are inserted into the ground near the base of your house.

Although the pipe system is attached to the ground when entering the house, the connection between the electrical panel and the pipes, by means of the ground, is not an optimal driving path. The grounding wire that runs from the electrical panel to the grounding electrode helps reduce the voltage increases that often occur due to lightning or other causes. The cables that connect the metal pipe are preventive and only become important in the unlikely event that an electrical conductor touches the pipe. In that case, the correct union of the pipe system will ensure that the current does not remain where the fault is, where it could electrocute anyone who touches a metal part of it, such as a faucet handle. The connection is made relatively efficiently in the water heater, as in the gas line.

The electrical system of a house is composed of a series of components and fundamental endowments that vary according to the greatness and the square meters of it. Electrical panel upgrade aspects must be taken into account when making the budget for electrical installation. It is part of the central system, that the current ones are usually larger than the old models and have a general switch and at least two of the differentials. The number of lines depends on the square meters of the house and the level of installation that is installed. From the central system, with the controller to measure the consumption, the conductor cables that lead to the individual meter (that is, the electric panel unit) located inside the house and that normally is in the entrance and the zone of the main door.

Electrical panel upgrade is needed when you have the load more than the board itself, but don’t worry we have the services that are independent, family-owned electrical contractor specializing in lighting design. Our company enjoys a great reputation, bringing more than 23 years of experience to each project. Count on our experience every time you need electrical work done. We are with all the licenses, in conditions of servitude and insured. You can count on our electrical panel upgrade services to offer the best electric power service in the industry. Specializing in circuit panel upgrades, we are your preferred electrician.

Lauren Harvey

Create Account

Log In Your Account